5500 Watt Immersion Heater

 

5500 watt heat source with a 4' pig tail is a cost effective secondary element for your kettle.

Use two or more elements to reach desired temperature then turn off and leave the fine control to the SSR controller. Comes without a plug.   

  • 5500 watt heating element. 
  • BUD abs enclosure.
  • Strain reliefs.
  • 10 Gauge wire. 
  • Wires are labeled for proper installation.
  • Connects with 2"Tri-Clamp fittings. 
  • Easily replaceable element
The included element is a high watt density. Some applications are better served with a low or ultra low density element, The heater accepts 1" threaded elements and is easy to change. Switching to a lower density element prolongs element life and helps to prevent scorching. 
 
Twist lock plugs for your element can be found here. If connecting to an SSR controller, you will need to purchase a male twist lock plug.
 
Make sure to purchase your 2" tri-clamp and gaskets for your heating element by clicking on the links.

 

Price: $129.91
SKU: SS188