Baskets and Filters

Barrel Filters

Filter Disk with your choice of stainless wire mesh.  If your preference for mesh is not listed, choose “other” and we will order it for you. 

Barrel Disks are meant to drop directly into a barrel. They will not fit our baskets or T-rings.  For two-stage filtration, you place the basket or T-ring directly on top of the disc.

 

  • BS-30 fits 65-gallon, 110-gallon, and larger tanks.
  • BS-26 fits 85- and 100-gallon tanks
  • BS-22 fits 44- and 55-gallon tanks
$0.00

T-Ring

The T-ring is for applications that need two stage filtration, but they are not suited to a basket.

T-rings sit on top of the barrel filter and provides spacing and support for the basket filter.

 

  • BS-29 fits 65-gallon, 110-gallon, and larger Barrels.
  • BS-25 fits 85- and 100-gallon Barrels
  • BS-21 fits 44- and 55-gallon Barrels
$0.00

Basket Hanger

The Basket hanger facilitates the removal of the basket from the drum. 

Typically, one hanger per size is all you will need. 

  • BS-29 fits 65-gallon, 110-gallon, and larger baskets.
  • BS-25 fits 85- and 100-gallon baskets
  • BS-21 fits 44- and 55-gallon baskets
$0.00

Basket Filters

Filter Disk For Basket.

Filter Disk with your choice of stainless wire mesh.  If your preference for mesh is not listed, choose “other” and we will order it for you. 

Basket disks fit our baskets and T-rings.

  • BS-29 fits 65-gallon, 110-gallon, and larger baskets.
  • BS-25 fits 85- and 100-gallon baskets
  • BS-21 fits 44- and 55-gallon baskets
$0.00

Baskets

Our baskets are solid sided and will accept any basket filter. They feature attachment points for easy lifting with a basket hanger. Typically, we configure our baskets to sit on the support ring and end just short of the top of the barrel leaving enough room for a lid. We can set these up to your specifications: Want the basket to be taller than the drum? Or how about installing a heater element or two below the basket? Just contact us and we will build something just for you. 

$0.00

Barrel Set Up

 

Adds supports to separately purchased barrel or kettle, for use of a Basket or Filter Disk. Supports are generally set 3” off the bottom of the tank.  If you would like it set up differently, contact us and we will work with you to suit your project.

 Please note that we can not weld the supports into a drum that is lighter than 18 gauge steel.

 

$225.00
Syndicate content